Detailed instructions for use are in the User's Guide.
[. . . ] No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of this company.
DISCLAIMER
This company makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness for any particular purpose. Further, this company reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation of this company to notify any person of such revision or changes.
WARNING
Use the attached specified power supply cord. If you use another power-supply cord, it may cause interference with radio and television reception. Use the attached VGA cable or serial mouse cable with this equipment so as to keep interference within the limit of a FCC Class B device. [. . . ] APPENDIX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FEATURES AND CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 16 17 18 19 21 21 21 22 23 23 23 23 23 24 24
Other Correspondent Remote Functions and Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
IV English
Introduction
Projector Features
A Image Resolution
1
Fully compatible with true SVGA (LVP-H6500)/XGA (LVP-XD10U) and supports SXGA using advanced intelligent compression technology. The advanced intelligent compression technology enables it to present clear compression SVGA/XGA images without line omission.
B
Brightness
Provides superior brightness using TI's Digital Micromirror Device (DMD) and our own optical design, with a geometric effect that increases light usage efficiency. By increasing the light usage efficiency we can better reproduce the three basic colors (RGB) required for color reproduction on a single DMD.
C
Portability
This projector has a sophisticated shape, like that of an attached case, with a retractable carrying handle that is extremely compact and lightweight. It helps you make powerful presentations wherever you go with its 5-pound weight and B5 size.
D
Keystone
The projection position is already set to the height of the line of vision; there is no keystone effect. Even when projecting above or under the height of the line of vision, image distortion (if any) can be adjusted using the hotkey "KEYSTONE" correction function.
E
Multilanguage
The OSD (On Screen Display: information screens and menus) in 7 languages (English, French, Dutch, Italian, German, Spanish and Simplified Chinese. ) provides you with additional information to help you make corrections with OSD operation in your native languages.
F
Auto Detect System
This projector can detect display signals from PCs with frequently used timing automatically, or use the hotkey "AUTO" to do the optimization simultaneously. It does not require complicated adjustments in order to project picture images from PCs.
G
Ceiling Mount and Rear Screen Projection
The projector is equipped with a full mirror scan conversion function (vertical/horizontal mirror), which allows the image to be reversed for ceiling mounting as well as for rear projection applications.
English
1
H
AV box (Model name: VA-10U)
An AV box is optional, and users can attach one or two to the projector. Additionally, our AV box video standard is compatible with: NTSC PAL SECAM NTSC4. 43 U. S. and Canada standard Western Europe standard France and Eastern Europe standard Middle East standard
If users want to watch CATV, an AV box will serve the need.
Description
A FRONT (figure)
Ventilation Hole
PROJECTION LENS
Figure 1 Front view
B
REAR (figure)
CONTROL PAD CONTROL PORT (FOR MOUSE)
AC INLET
AV BOX
CONNECTOR
COMPUTER IINPUT D-SUB 15 PIN
Figure 2 Rear view
2
English
C
BOTTOM (figure)
ADJUSTABLE FEET LAMP COVER
Figure 3 Bottom view
Installation
A Positioning
This projector is basically designed to project on a flat projection surface. The picture will become dark or the color will fade after the lamp has been used for a long time. Replace the lamp with a new one.
A
1.
Lamp/temperature Status LED Indicator
Lamp in excess of service hours
When the LED light is a continuous green, it means the lamp has exceeded 900 service hours. After this light appears, it is advisable to replace the projection lamp as soon as possible.
1. AND RESET THE LAMP TIMER" will be displayed on the screen if the lamp has been operated for 900 hours (see figure 15).
English
11
2. THE POWER WILL TURN OFF AFTER 20 HOURS" will be displayed on the screen if the lamp has been operated for 980 hours. "PLEASE CHANGE A NEW LAMP" will blink on the screen together with a green LED if the lamp has been operated for more than 1000 hours (see figure 17). All three of the above messages will not display for more than 15 seconds, but each message will be displayed whenever you turn on the lamp.
Figure 15 Lamp replacement warning signal
Figure 16 Lamp replacement warning signal
Figure 17 Lamp replacement warning signal
2. 3.
Lamp is not well attached Temperature is too high
If the LED blinks rapidly, it indicates that the lamp is not attached properly. If the projector's internal temperature is too hot to operate safely, the LED will blink slowly for one minute and then the lamp will turn off automatically.
4.
Normal status
If the LED light is off, it means the lamp and temperature inside the projector are normal.
Caution The lamp indicator will light when the lamp becomes too hot. Turn off the power and let the projector cool for 45 minutes, then turn it on again. If the indicator is still shining, contact your dealer.
12 English
B
Replacing the Lamp
Replacing the lamp
When replacing the lamp, turn off the projector and unplug the AC cord. [. . . ] To turn on/off the mute function.
*The priority of input signal detection: (a. ) PC (b. ) Video (c. ) S-Video *When selecting input sources, the projector will detect the selected input simultaneously, and the OSD menu will still exist on the screen.
English
19
Other Correspondent Remote Functions and Messages
OSD FUNCTION The selected source will be displayed at the bottom right of the screen for 3 seconds after selecting the source. Source The image will be frozen when the "Freeze" button is pressed. A mark appears at the lower right of the screen for 3 seconds during the freeze function. Furthermore, a " " mark appears at the lower right of the screen for 3 seconds when freeze is released. [. . . ]