User manual ARCTIC COOLING COPPER LITE INSTALLATION

[. . . ] Make sure the side of the heat sink with the higher cut out aligns with the fixed side of the clip and move this end as close to the heatsink as possible. [. . . ] Confirm the lugs of the clip are properly installed to the hooks of the socket on both side, and that the heat sink cannot release anymore. Attach the power plug onto the according power socket on the mainboard. Keep all cables inside the computer case clear from the fan by fixing them with cable ties. FAQ: The Computer displays a fan warning or switches off after a few seconds The BIOS of some mainboard manufacturers compares the speed of the fan with a specified value. If the fan speed does not match the specified value, either the PC emits a warning or switches off. Contrary to the temperature control, the RPM control is of no importance, since fan speeds will be between 500 and 7000 RPM depending on the type of fan. Please consult your mainboard manufacturer for more information regarding these settings. This protects your CPU also from other cooling problems than a failing fan. [. . . ] The cooler does not need to be removed from the processor for this procedure. [. . . ]