User manual ASUS MY CINEMA-PE6200ANALOG MY CINEMA SERIES USER’S MANUAL(ENGLISH)

[. . . ] IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT. SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe. [. . . ] com/PowerSupplyCalculator/PSCalculator. aspx?SLanguage=en-us for details. 4. CPU, and chassis fan connectors (4-pin CPU_FAN, 4-pin CHA_FAN) Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector. CHA_FAN MY CINEMA-PE6200ANALOG GND GND 8 01 CPU_FAN CPU FAN PWM CPU FAN IN CPU FAN PWR GND 8 01NIVKWVVMK\WZ[ Do not forget to connect the fan cables to the fan connectors. Insufficient air flow inside the system may damage the motherboard components. The CPU_FAN connector supports a CPU fan of maximum 2A (24 W) fan power. ASUS MY CINEMA-PE6200ANALOG 1-27 +5V CHA FAN IN CHA FAN PWR GND 5. Speaker connector (4-pin SPEAKER) The 4-pin connector is for the chassis-mounted system warning speaker. The speaker allows you to hear system beeps and warnings. SPEAKER +5V GND GND Speaker Out PIN 1 MY CINEMA-PE6200ANALOGSpeaker Out Connector 6. System panel connector (10-1 pin PANEL) This connector supports several chassis-mounted functions. 8 01 F_PANEL PWR LED PWR BTN PIN 1 MY CINEMA-PE6200ANALOG System panel connector • System power LED (2-pin PLED) This 2-pin connector is for the system power LED. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode. Hard disk drive activity LED (2-pin +HDLED) This 2-pin connector is for the HDD Activity LED. The IDE LED lights up or flashes when data is read from or written to the HDD. Power/Soft-off button (2-pin PWRBTN) This 2-pin connector is for the system power button. Reset button (2-pin RESET) This 2-pin connector is for the chassis-mounted reset button for system reboot without turning off the system power. • • • 1-28 Chapter 1: Product introduction +HD_LED GND PWR PLEDPLED+ Reset Ground HD_LEDHD_LED+ MY CINEMA-PE6200ANALOG RESET 7. Intel® H77 Serial ATA 3. 0Gb/s connectors (7-pin SATA3G_1~4 [blue]) These connectors connect to Serial ATA 3. 0 Gb/s hard disk drives and optical drives via Serial ATA 3. 0 Gb/s signal cables. If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 0+1(10) configurations with the Intel® Rapid Storage Technology through the onboard Intel® H77 chipset. SATA3G_1 GND RSATA_TXP1 RSATA_TXN1 GND RSATA_RXN1 RSATA_RXP1 GND SATA3G_2 GND RSATA_TXP2 RSATA_TXN2 GND RSATA_RXN2 RSATA_RXP2 GND SATA3G_3 GND RSATA_TXP3 RSATA_TXN3 GND RSATA_RXN3 RSATA_RXP3 GND MY CINEMA-PE6200ANALOG SATA3G_4 GND RSATA_TXP4 RSATA_TXN4 GND RSATA_RXN4 RSATA_RXP4 GND MY CINEMA-PE6200ANALOG SATA 3. 0Gb/s connectors • These connectors are set to [AHCI] by default. Copy the original motherboard BIOS using the ASUS Update utility. 2. 1. 1 The ASUS Update is a utility that allows you to manage, save, and update the motherboard BIOS in Windows® environment. • ASUS Update requires an Internet connection either through a network or an Internet Service Provider (ISP). • This utility is available in the support DVD that comes with the motherboard package. ASUS Update utility Installing ASUS Update To install ASUS Update: 1. 2. 3. Place the support DVD in the optical drive. Follow the onscreen instructions to complete the installation. Quit all Windows® applications before you update the BIOS using this utility. Updating the BIOS To update the BIOS: 1. 2. From the Windows® desktop, click Start > Programs > ASUS > AI Suite II > AI Suite II X. XX. XX to launch the AI Suite II utility. Click Update button from the Quick Bar, and then click ASUS Update from the popup menu. From the list, select either of the following methods: Updating from the Internet a. b. c. Select Update BIOS from the Internet, then click Next. Select the ASUS FTP site nearest you to avoid network traffic, then click Next. From the FTP site, select the BIOS version that you wish to download then click Next. ASUS MY CINEMA-PE6200ANALOG 2-1 The ASUS Update utility is capable of updating itself through the Internet. Always update the utility to avail all its features. Updating from a BIOS file 3. a. b. Select Update BIOS from file, then click Next. Locate the BIOS file from the Open window, then click Open. Follow the onscreen instructions to complete the updating process. 2. 1. 2 The ASUS EZ Flash 2 feature allows you to update the BIOS without using an OS‑based utility. Before you start using this utility, download the latest BIOS file from the ASUS website at www. asus. com. ASUS EZ Flash 2 To update the BIOS using EZ Flash 2: 1. 2. Insert the USB flash disk that contains the latest BIOS file to the USB port. Go to the Tool menu to select ASUS EZ Flash Utility and press <Enter> to enable it. Exit ASUS EZ Flash 2 Utility V01. 04 Flash Info MODEL: MY CINEMA-PE6200ANALOG File Path: fs0:\ Drive Info fs0:\ Folder Info 12/09/2011 10:23p 8388608 P8H77I. CAP VER: 0214 DATE: 12/09/2011 File Info MODEL: Help Info VER: DATE [Enter] Select or Load [Tab] Switch [Up/Down/PageUp/PageDown/Home/End] Move [Esc] Exit [F2] Backup 2-2 Chapter 2: BIOS information 3. 4. 5. 6. Press <Tab> to switch to the Drive field. Press the Up/Down arrow keys to find the USB flash disk that contains the latest BIOS, and then press <Enter>. [. . . ] If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • • • • Reorient or relocate the receiving antenna. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. The use of shielded cables for connection of the monitor to the graphics card is required to assure compliance with FCC regulations. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. IC: Canadian Compliance Statement Complies with the Canadian ICES-003 Class B specifications. [. . . ]