User manual KENWOOD KDC-258U

[. . . ] KDC-258U KDC-158U KDC-118U CD-RECEIVER KDC-MP258U KDC-MP158U INSTRUCTION MANUAL AMPLI-TUNER LECTEUR DE CD MODE D’EMPLOI REPRODUCTOR DE DISCOS COMPACTOS RECEPTOR DE FM/AM MANUAL DE INSTRUCCIONES Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new CD-receiver. For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product. [. . . ] 5 Turn the volume knob to select the desired station to delete, then press the knob. 1 Press 2 Turn the volume knob to select a category, then press the knob. Indd 9 9 Data Size: Book Size: B6L (182 mm x 128 mm) B6L (182 mm x 128 mm) 11/9/2013 3:47:25 PM AUDIO SETTINGS While listening to any source. 2 Turn the volume knob to select [AUDIO CONTROL], then press the knob. 3 Turn the volume knob to make a selection (see the following table), then press the knob. default: XX SUB-W LEVEL BASS LEVEL MID LEVEL TRE LEVEL PRESET EQ –15 to +15 (0): Adjusts the subwoofer output level. €8 to +8 (+6): –8 to +8 (+5): –8 to +8 (0): Adjusts the level to memorize for each source. ) SUB-W PHASE REVERSE (180°)/ NORMAL (0°): Selects the phase of the subwoofer output to be in line with the speaker output for optimum performance. (Selectable only if a setting other than [THROUGH] is selected for [LPF SUBWOOFER]. ) R15 to F15 (0): Adjusts the rear and front speaker output balance. l15 to R15 (0): Adjusts the left and right speaker output balance. €8 to +8 (for AUX) ; –8 to 0 (for other sources): Presets the volume adjustment level of each source. ) ON: Creates realistic sound by compensating the high-frequency components and restoring the rise-time of the waveform that are lost in audio data compression. (Select [USER] to use the customized bass, middle, and treble settings. LV1/ LV2: Selects your preferred low and high frequencies boost to produce a well-balanced sound at a low volume level. BASS BOOST LOUDNESS Muting upon the reception of a phone call Connect the MUTE wire to your telephone using a commercial telephone accessory. ) • To continue listening to the audio system during a call, press  SRC. LPF SUBWOOFER THROUGH: All signals are sent to the subwoofer.  ; 85HZ/ 120HZ/ 160HZ: Audio signals with frequencies lower than 85 Hz/ 120 Hz/ 160 Hz are sent to the subwoofer. Indd 10 11/9/2013 3:47:26 PM Data Size: Book Size: B6L (182 mm x 128 mm) B6L (182 mm x 128 mm) DISPLAY SETTINGS 1 Press the volume knob to enter [FUNCTION]. MORE INFORMATION General • This unit can only play the following CDs: About KENWOOD Music Editor Light and KENWOOD Music Control • This unit supports the PC application KENWOOD Music Editor Light and Android™ application KENWOOD Music Control. € When you play audio files with song data added using the KENWOOD Music Editor Light or KENWOOD Music Control, you can search for audio files by Genres, Artists, Albums, Playlists, and Songs. [. . . ] Basic procedure 1 Remove the key from the ignition switch, then 2 3 4 5 14 EN_KDC-258U[KW_K0]f. 2 Fit the catch pin on the extraction keys into the holes on both sides of the trim plate, then pull it out. 3 Insert the extraction keys deeply into the slots on each side, then follow the arrows as shown on the right. Data Size: Book Size: B6L (182 mm x 128 mm) B6L (182 mm x 128 mm) 11/9/2013 3:47:26 PM Wiring connection KDC-258U KDC-158U KDC-118U KDC-MP258U KDC-MP158U Part list for installation (A) Faceplate Rear/ subwoofer output Antenna terminal Front output Rear/ subwoofer output Fuse (10 A) (B) Trim plate If no connections are made, do not let the wire come out from the tab. [. . . ]