User manual KENWOOD KDC-U349

[. . . ] The functions that can be used and the information that can be displayed will differ depending on the models being connected. · You can damage both your unit and the CD changer if you connect them incorrectly. 2CAUTION To prevent damage to the machine, take the following precautions: · Make sure to ground the unit to a negative 12V DC power supply. · Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. · Do not set the removed faceplate or the faceplate case in areas exposed to direct sunlight, excessive heat or humidity. [. . . ] Push the Control knob to [4] or [¢]. Random Play Playing all the songs on the disc in random order. When it's ON, "DISC RDM" (CD), "FOLD RDM" (Audio file) is displayed. · When the Control knob is pushed to [¢], the next song select starts. Function of disc changer/ Audio file Disc Search/Folder Search Selecting the disc set in the Disc changer or the folder recorded on the Audio file media. Push the Control knob to [AM] or [FM]. Track/File/Disc/Folder Repeat Replaying the song, disc in the Disc changer or Audio file folder you're listening to. Each time the button is pressed, the Repeat Play switches as shown below. Function of disc changer Magazine Random Play Play the songs on all the discs in the disc changer in random order. Each time the button is pressed, the Magazine Random Play turns ON and OFF. When it's ON, "MGZN RDM" is displayed. · When the Control knob is pushed to [¢], the next song select starts. In CD & External disc source Repeat play Track Repeat Disc Repeat (In Disc Changer) OFF Display "TRAC REP" "DISC REP" "REP OFF" In Audio file source Repeat play File Repeat Folder Repeat OFF Display "FILE REP" "FOLD REP" "REP OFF" English | 17 CD/Audio file/External disc control features Function of the KDC-U349/W4031/W409/W431G Function of Audio file Folder Select Quickly selecting the folder you want to listen to. 1 Enter Folder Select mode Press the [F. SEL] button. During Select mode the folder information is displayed as shown below. Folder name display Displays the current folder name. 2 Select the folder level Push the Control knob to [FM] or [AM]. With the [FM] of the Control knob, you move 1 level down and with the [AM] of the Control knob 1 level up. Selecting a folder in the same level Push the Control knob to [4] or [¢]. With the [4] of the Control knob, you move to the previous folder, and with the [¢] of the Control knob to the next folder. 2 Do the step 4 through 7 step operation, and reenter the security code. 4 Exit Clock adjustment mode Press the Control knob. 20 | English Function of the KDC-U349/W4031/W409/3031A/ 3031G/309A/309G In Standby mode Synchronizing the RDS station time data and this unit's clock. Display "SYNC ON" "SYNC OFF" Setting Synchronizes the time. Adjust the time manually. "NEWS 90M" When "NEWS 00M" -- "NEWS 90M" is set, the News Bulletin Interrupt function is ON. When the news bulletin starts, "NEWS" is displayed, and it switches to the news bulletin. · If you choose the "20M" setting, further news bulletins will not be received for 20 minutes once the first news bulletin is received. · The news bulletin volume is the same level that was set for <Traffic Information> (page 13). · This function is only available if the desired station sends PTY-code for news bulletin or belongs to <Enhanced Other Network>-Network sending PTYcode for news bulletin. · When the News Bulletin Interrupt function is ON, it switches to an FM station. · It takes 3 to 4 minutes to synchronize the clock. In Standby mode DSI (Disabled System Indicator) A red indicator will blink on the unit after the faceplate is removed, warning potential thieves. LED OFF. In Tuner mode Local Seek Function of the KDC-U349/W4031/W409 In Standby mode Selectable Illumination Selecting the button illumination color as green or red. Display "KEY RED" "KEY GRN" Setting The illumination color is red. The illumination color is green. Only stations whose reception is good are searched for in auto seek tuning. Display "LO. S OFF" "LO. S ON" Setting The local seek function is OFF. [. . . ] Connect the wire correctly, referring to the section on <Connecting Wires to Terminals>. The TEL mute function turns ON even though the TEL mute wire is not connected. Even if Loudness is turned ON, high-pitched tone isn't compensated for. High-pitched tone isn't compensated for when in Tuner source. No sound can be heard, or the volume is low. [. . . ]