User manual KENWOOD KDC-U353A

[. . . ] In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product safety. KENWOOD CORPORATION 2967-3, ISHIKAWA-CHO, HACHIOJI-SHI TOKYO, JAPAN KENWOOD CORP. 10, CHAPTER 1, SUBCHAPTER J. NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment may cause harmful interference to radio communications, if it is not installed and used in accordance with the instructions. [. . . ] Changing the Display: Each time you press the CLK button, the display changes as follows: 5 Press either the 4 or button to move the cursor to the -- 14 -- CD/External disc control features Station frequency SNPS name (only when being preset) Clock 0 4/ SCRL SCAN RDM REP M. RDM SRC CLK/ MENU FM/ AM Operation of the KDC-316S/KDC-37MR/KDC-316V/KDC-216S/KDC-U353A KDC-416S Track number Clean Reception System Circuit (CRSC) Temporarily have reception switched from stereo to mono to reduce multi-path noise when listening to the FM station. Turning CRSC On/Off: Press the CRSC button for at least one second to turn the function on/off. The CRSC indicator lights up when CRSC is on. NOTE Disc number IN indicator KDC-316S/37MR/316V/216S Track number Track time Strong electrical fields (such as from power lines) may cause unstable sound quality when CRSC is turned on. For details, refer to the Clean Reception System Circuit page for the menu settings. (page 20) Disc number IN indicator KDC-U353A Track number Track time SCN indicator RDM indicator REP indicator IN indicator Track time SCN indicator RDM indicator REP indicator -- 15 -- CD/External disc control features English Playing CDs Playing CDs: If no CDs are inserted, insert one in the slot with the label facing up. If a CD is already inserted, press the SRC button repeatedly to select the CD mode. The CD stops playing and ejects from the slot. 2CAUTION NOTE The external disc control mode will differ, depending on the unit that is connected. Mode Display Examples "CD2" . . . when a CD player is connected "DISC" . . . when a disc changer is connected "DISC-1/CH-1" , "DISC-2/CH-2" . . . when two disc changers are connected NOTE When one disc has finished playing its last track, the next disc in the changer will start playing. When the last disc in the changer has finished, the player will return to the first disc and start playing it. Disc #10 is displayed as "0". Do not attempt to insert a CD into the slot if another one is already there. CD, it will get stuck inside and can cause the unit to malfunction. NOTE When you load a CD and eject it right away, the next time you try to insert the CD may not load. The track scan function only scans each track on a disc once. Track Repeat ON M Disc Repeat ON (Function of disc changers : KDC-416S/316S/37MR/316V only) M Random Play Play all the tracks on the current disc in random order. Track/Disc Repeat OFF The REP indicator lights up when repeat play is turned on. (KDC-316S/37MR/316V/216S/116S) The track number blinks in the display when track repeat is on. (KDC-416S/316S/37MR/316V) "TREP ON"/"REP ON" is displayed and the track number blinks in the display when track repeat is on. (KDC-416S) "DREP ON" is displayed and the disc number blinks in the display when disc repeat is on. (KDC-416S) NOTE 1 Press the RDM button to switch random play on and off. The RDM indicator lights up when random play is turned on. (KDC-316S/37MR/316V/216S/116S) "RDM ON" is displayed when random play is turned on. (KDC416S) The track number will change over and over in the display as the next track is being selected. The selected track number blinks in the display as it is being played. NOTE (For disc changers : KDC-416S/316S/37MR/316V only) When all the tracks on a certain disc have been played using random play, the next disc on the changer will start playing using the same function. Repeat play is canceled when you eject the disc. 2 To change the track being heard, press the button. Track Scan Successively play the beginning of each track on a disc until you find the track that you want to listen to. The SCN indicator lights up and the first 10 seconds of each track will be played, in order. (KDC316S/37MR/316V/216S/116S) "SCAN ON"/"TSCN ON" is displayed and the first 10 seconds of each track will be played, in order. [. . . ] The speakers are not wired correctly. Radio reception is poor. The car antenna is not extended. The antenna control wire is not connected. The memory is erased when the ignition is turned off. The battery wire has not been connected to the proper terminal. The ignition and battery wire are incorrectly connected. A CD ejects as soon as it is loaded. The CD is upside-down. Random play has been selected. -- 30 -- Troubleshooting Guide PROBLEM Can't remove disc. POSSIBLE CAUSE The cause is that more than 10 minutes has elapsed since the vehicle ACC switch was turned OFF. SOLUTION The disc can only be removed within 10 minutes of the ACC switch being turned OFF. [. . . ]