User manual KENWOOD KRF-V7030

[. . . ] Using the remote control without completely understanding its design and how to switch the operation modes may result in incorrect operations. B60-5197-20 02 ID (K, P, T, M, Y, X, E2) 0109 Before applying the power Units are designed for operation as follows. AC 120 V only Australia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 230 V only China and Russia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 110-120 / 220-240 V switchable* Caution : Read this page carefully to ensure safe operation. Safety precautions WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN For the United Kingdom Factory fitted moulded mains plug 1. [. . . ] 2 Connect headphones to the PHONES jack. PHONES Switching back the previous setting Press the BASS BOOST key again. 3 Use the VOLUME CONTROL knob or VOLUME keys to adjust the volume. 20 EN Recording Recording audio (analog sources) 3 Press and hold the DIMMER key for more than 2 seconds to select the A-REC or M-REC mode. 2 A-REC : The digital input signals (DTS, Dolby Digital, or PCM) are identified automatically and converted into stereo signals that are ready for recording. 3 M-REC : The input signal type at the moment this mode is selected is held throughout this mode. For A-REC mode: INPUT SELECTOR Recording a music source 1 Use the INPUT SELECTOR knob to select the source (other than "MD/TAPE") you want to record. 3 Start playback, then start recording. Recording video For M-REC mode: 1 Use the INPUT SELECTOR to select the video source (other than "VIDEO1") you want to record. < 4 Start playback, then start recording. Recording audio (digital sources) Switch on the REC MODE to record a digital input source. Usually use the A-REC (Auto-Record) MODE to record audio input sources. When the digital mode changes during recording in the A-REC MODE , the audio input source may be interrupted momentarily. · If the audio reproduction stops in the middle due to change in the input signals, etc. , press the DIMMER key. Recording music in A-REC or M-REC mode DIMMER INPUT SELECTOR 1 Use the INPUT SELECTOR knob to select the source [CD/DVD, DVD or DVD/6CH (VR-615/KRF-V5060D only) or VIDEO2] you want to record. 2 Set the MD or TAPE recorder to record. 21 EN Listening to radio broadcasts The receiver can store up to 40 stations in the memory and recall them by one-touch operation. Radio stations can be classified into RDS (Radio Data System) stations and other stations. In order to use the PTY function, the RDS stations must be stored in the preset memory using the RDS AUTO MEMORY function. RDS DISPLAY MEMORY BAND AUTO INPUT SELECTOR Pressing the RDS DISPLAY key changes the contents of the display. Each press switches the display mode as follows: 1 PS (Program Service name) display 2 RT (Radio Text) display 3 Frequency display 1 PS (Program Service name) display: The station name is displayed automatically when an RDS broadcast is received. If no PS data was sent, "NO PS" is displayed. 1Use the INPUT SELECTOR knob to select the tuner. 3Press and hold the MEMORY key for more than 2 seconds. 2 RT (Radio Text) display: Text data accompanying the RDS broadcast scrolls across the display. "NO RT" or "RT----" is displayed if the current RDS station does not provide RT data. 3 Frequency display: Displays the frequency of the current station. · After a few minutes, up to 40 RDS stations are preset in order from channel "01". · Stations already stored in the preset memory may be replaced by RDS stations. (i. e. , If the RDS AUTO MEMORY function detects 15 RDS stations, the stations currently preset at numbers 01~15 will be replaced by the RDS stations. ) 24 EN Listening to radio broadcasts (For the U. K. and Europe only) Tuning by Program TYpe (PTY search) This function lets you set the tuner to automatically search for stations which are currently broadcasting the type of program (genre) you want to listen to. Under certain receiving conditions, it may take more than 1 minute to complete the search. 3Press the PTY key to start searching. EXAMPLE : Searching for a Rock Music broadcast. Display while searching. Blinks Program type name display Display when a station is received. PTY TUNING 1/¡ MULTI CONTROL Goes out Station name display · No sound is heard while "PTY" is blinking. · If the desired program type cannot be found, "NO PROG" is displayed, then after several seconds the display returns to the original display. Preparations · Execute the RDS auto memory procedure. · Tune to an RDS station. To select another program type Repeat steps 1, 2 and 3. 1 Press the PTY key to activate the PTY search mode. When an RDS broadcast is received, the program type is shown on the display. [. . . ] 45 µV / 42. 1 dBf (46 kHz DEV. , S/N 46 dB) Total harmonic distortion (1 kHz) MONO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0. 2% (71. 2 dBf input) STEREO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0. 8% (71. 2 dBf input) Signal to noise ratio (DIN weighted) MONO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71. 2 dBf input) Stereo separation (DIN 1 kHz) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]