User manual KENWOOD XD-V727

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual KENWOOD XD-V727. We hope that this KENWOOD XD-V727 user guide will be useful to you.


KENWOOD XD-V727 : Download the complete user guide (5761 Ko)

Manual abstract: user guide KENWOOD XD-V727

Detailed instructions for use are in the User's Guide.

[. . . ] If the plug fitted is not suitable for the power points in your home or the cable is too short to reach. A power point, then obtain an appropriate safety approved extension lead or adapter, or consult your dealer. If nonetheless the mains plug is cut off, remove the fuse and dispose of the plug immediately, to avoid a possible shock hazard by inadvertent. IMPORTANT : The wires in the mains lead are coloured in accordance with the following code : Blue : Neutral Brown : Live Do not connect those leads to the earth terminal of a three-pin plug. Basic section Preparation section Safety precautions CAUTION WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] When listening to a station with the "EON"display lit and another station of the same network starts to broadcast an information program for which a reservation has been made, then that station will be selected automatically. When the desired information program ends, return is made to the original program. Set the reception band to FM. ¢ 1 Auto preset the stations. 1 Receive a broadcast. 2 Keep the ENTER key pressed (2 sec or longer). ENTER This is not required when auto presetting has already been executed. ÷ When all 40 stations have already been preset by the procedure for "One-by-one presetting (manual preset)", the EON function will not operate. Auto presetting must be used. The EON data presently being broadcasted are taken in automatically. 2 Select the desired information. Each press switches the modes as follows. 1 TA. . . . . . . . . . . . . . . . . . . . . . . . . . Traffic Announcement 2 NEWS. . . . . . . . . . . . . . . . . . . News 3 INFO. . . . . . . . . . . . . . . . . . . . . . Information 4 Display not lit. . . . . . . EON cancelled TA/NEWS/INFO. This lights when a station transmits traffic information. Lights when "INFO" is selected. EX. BASS R D S EON TP INFO. PTY TUNED STEREO AUTO Application section )1 F M 1 ) 2 . 5 ) CLASSIC ROCK EQ. POP MANUAL VOL. MHz RUNNING INDICATOR ÷ Please execute automatic presetting when TA, NEWS, and INFO cannot be selected. 3 Receive an RDS station. Select a station where "RDS" and "EON" are lit. P. CALL "RDS" and "EON" are lit. EX. BASS R D S EON TP INFO. PTY TUNED STEREO AUTO )2 FM 9 ) . ) ) CLASSIC ROCK EQ. POP MANUAL VOL. MHz RUNNING INDICATOR ÷ When "EON" does not light although an RDS station is received, that station is not transmitting EON data. The tune interrupted at the end of tape side A is faded out and side B starts with fading in from the middle of that tune. Knowledge sections 1 2 3 5 1 2 3 4 8 7 6 4 7 6 5 4 Side B The tune interrupted in the middle at the end of tape side B is simply faded out. Side B 44 Convenient Recording Methods XD-V727 (En) One-touch recording of one CD, MD (one-touch edit recording of all tracks) All tracks of one CD or MD are recorded. For recording to tape, please read "Let's record" in the operation manual of the cassette deck (option) carefully. When equalizer, SRS 3D, or any other effect is applied to the sound, the sound with applied effect can be recorded (except for digital recording from CD to MD). ´ Preparation section 1 Make the preparations for recording. CD =MD 1 Insert a recordable disc into the MD recorder. 7 Adjust the recording level. * ) * Basic section 2 Start recording. CD =MD 1Select the target disc. CD player and MD recorder must be brought to stopped condition. MD =TAPE CD =TAPE 1 Select the target disc. DISC SELECTOR DISC SELECTOR DISC1 DISC2 DISC3 DISC1 DISC2 DISC3 Application section MD TAPE 2 Start recording. O. T. E. Press in stop mode. 2 Start recording. CD TAPE Press before playback of the CD starts. key is pressed after playback has started, only the track being played at that time will be recorded. ÷ With recording onto tape, the track will be interrupted for the part of the guide tape at the tape reversal, where recording is not possible. Please use a different recording method if this is to be avoided. Note Knowledge sections To interrupt a recording CD =MD 7 MD =TAPE 7 CD =TAPE 7 ÷ Recording and playback will be stopped. Convenient Recording Methods XD-V727 (En) 45 When a desired track is found, only that track is recorded (One-touch edit recording of one track) While listening to a CD or MD, it is possible to record only the track being heard at that time from the beginning of that track. For recording to tape, please read "Let's record" in the operation manual of the cassette deck (option) carefully. When equalizer, SRS 3D, or any other effect is applied to the sound, the sound with applied effect can be recorded (except for digital recording from CD to MD). ´ 1 Make the preparations for recording. CD =MD 1 Insert a recordable disc into the MD recorder. 3 Insert disc(s) in the CD player. Preparation section MD =TAPE 1 Load a tape. 7 Adjust the recording level. * ) * 2 Playback of a CD or MD. key during playback of a track to be recorded. CD =MD MD =TAPE O. T. E. Basic section CD =TAPE MD TAPE CD TAPE Press during playback. Press during playback. Press during playback. Application section ÷ Return is made to the beginning of the track being played and recording starts. At the end of the recording MD recorder : Stop. Cassette deck : Stop is executed after an unrecorded portion of about 4 sec. [. . . ] ÷ There is no CD or MD set in the component to be played. Remedy Basic section ÷ Replace with new batteries. ÷ Set a CD or MD in the component to be played. % % Application section Knowledge sections 80 Specifications Main unit (RXD-V727) [Amplifier section] Rated power output STEREO MODE 50 watts per channel minimum RMS, both channels driven, at 6 , 1 kHz with no more than 10 % total harmonic distortion. 40 W + 40 W Signal to noise ratio AUX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 dB Input sensitivity / impedance AUX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE KENWOOD XD-V727




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual KENWOOD XD-V727 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.