User manual LG LAC-M1500
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual LG LAC-M1500. We hope that this LG LAC-M1500 user guide will be useful to you.
Manual abstract: user guide LG LAC-M1500
Detailed instructions for use are in the User's Guide.
[. . . ] · Never use solvents such as benzine or alcohol to clean the disc. Periodically wipe the contacts on the back of the control panel with a cotton swap moistened with alcohol.
Disposal of your old appliance 1. When this crossed-out wheeled bin symbol is attached to a product, it means the product is covered by the European Directive 2002/96/EC. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. [. . . ] · Do not store the battery with metallic materials.
7
Installation
Basic Installation
Bend the claws according to the thickness of the dashboard
Before installing, make sure that the ignition-switch is set to OFF and remove the terminal of the car battery to avoid short-circuiting. Install the unit into the installation sleeve.
Control panel
Removing the existing receiver unit.
A If there is already an installation sleeve for the receiver unit in the dashboard, it must be removed. Perform the same operation on the other side and pull the unit out from the mounting sleeve.
A
ISO-DIN Installation
1 3 2
4 5 6
1 2 3 4 5 6
Slide the unit into the ISO-DIN frame. Install the control panel to the unit.
Control panel
8
Connection diagram
Before connecting, make sure that the ignition switch is set to OFF, and remove the battery # terminal to avoid short circuits.
B
1 2 1 2 3 4 3 4 5 6 5 6 7 8 7 8
To Speaker To Vehicle
B
A A A A A A A
2
PHONE MUTE (ORANGE)
A
A
8
GROUND(-) (BLACK)
6
DIMMER SWITCH
DIMMER (PINK)
7
IGNITION SWITCH
TO IGNITION (RED)
4
TO BATTERY(+) (YELLOW)
5
POWER ANTENNA (BLUE)
1
AMPLIFIER (Optional)
BATTERY
1 2 3
C
REMOTE ON (BLUE/WHITE) POWER Antenna
4 5
CONTROL RELAY
6 7 8
B B B B B B B B
1. 8.
Violet : Rear Right + Violet/ Black Stripe : Rear Right Gray : Front Right + Gray / Black Stripe : Front Right White : Front Left + White/Black Stripe : Front Left Green : Rear Left + Green/ Black Stripe : Rear Left
9
Connection
C Speaker Connections A From antenna B To the wiring of the vehicle colors of leads.
1 2 3 4 5 6 7 8
· BLACK · ORANGE · PINK
L
REAR
: This lead is for the ground connection. : This lead is for connection to the power supply terminal when the ignition switch is set to ACC. : This lead is for connection to the battery (back-up) terminal from which power is always supplied. : This lead is for the power antenna connection.
· RED
· YELLOW
L
FRONT
· BLUE
R
FRONT
· BLUE/WHITE : This lead is for the remote amplifier on connection.
R
REAR
Connecting to Auxiliary Equipment (Optional)
Connect the AUDIO OUTPUT jack of this unit to the AUDIO INPUT jack of the Auxiliary Equipment.
FL (Front Left) FR (Front Right)
RL (Rear Left) RR (Rear Right)
To AUDIO OUT
To AUDIO IN
To AUDIO IN
Amplifier
10
Basic operation
Turning the unit on
Press MUTE/PWR (POWER/ on the remote control) or any other button.
Note
When you insert the CD in the CD slot, the unit turns on.
Turning the unit off
Press and hold MUTE/PWR (POWER/ on the remote control).
Insert a disc
1 2 Press to open the control panel. Draws the disc, and starts playback automatically.
Eject a disc
Press to open the control panel. When the disc is ejected by pressing during playback, it will be loaded automatically after 10 seconds unless you pull out disc from the unit.
Selecting a source
Press SOURCE repeatedly to select a source. TUNER CD USB TUNER. . .
Note
You cannot select a source if is not ready.
Adjusting the volume
Rotate MUTE/PWR (Press VOLUME on the remote control) to adjust the sound level.
Note
When you turn the unit off, the current volume level is automatically memorized. To cancel, press U/AS.
2
To scan the preset stations
Press u/PS. To cancel, press u/PS.
To tune in the preset stations
Press DRIVE/BAND to select the desired band and press the desired preset button 1~6 The preset station of the preset button 1~6 is displayed and the preset station is received.
15
RDS operation
RDS Display options
In normal RDS operation the display will indicate the station name. Pressing DISP enables you to cycle through the various data types in the following sequence: CT t FREQUENCY t PTY t RT t PS · CT (Time controlled by the channel) · PTY (Programme type recognition) · RT (Radio text recognition) · PS (Programme Service name) · PI (Programme Identification) · AF (Alternative Frequencies for the actual programme) · TP (Traffic programme Identification) · TA (Traffic Announcement Identification)
PTY (Programme Type) function
To select a certain program type out of the reception band, the following procedure can be used. Music group t Speech group t Search off 3 Press one of preset buttons 1~6 Each time this button is pressed, the display mode changes as follows. Speech group News, Affairs, Info Sport, Educate, Drama Culture, Science, Varied Weather, Finance, Children Social, Religion, Phone In Travel, Leisure, Document
Note
RDS is only available for FM reception.
TA (Traffic Announcement) function
TA reception allows the unit to switch temporarily to a Traffic Announcement from the current source (another FM station, CD, or other connected components). To switch the TA (Traffic Announcement) function on or off, press TA/PTY. · TA ON Traffic programs and announcements can be automatically received using TP/TA features. · TA OFF Traffic programs and announcements can not be received using TP/TA features.
16
CD/MP3/WMA operation
Playing an Audio CD and MP3/WMA Disc
The unit can play MP3/WMA formatted recordings on CD-ROM, CD-R or CD-RW discs. Before playing MP3/WMA recordings, read the notes on MP3/WMA Recordings on page 21. If you change the source, CD play also stops (without ejecting the CD). Next time you select "CD" as the source, CD play starts from where playback has been stopped previously. [. . . ] · Be sure to save the file in the memory card after formatting. When connecting this unit to a USB Hub, "USB CHECKING/USB ERROR1" will be shown in the display window. · Some memory sticks or cards may not be recognised depending on the type of memory card. · There is no support for a USB device (Card reader, USB memory stick, MP3 player) which requires installation. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE LG LAC-M1500
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual LG LAC-M1500 will begin.