User manual NOKIA 3205

[. . . ] Nokia 3205 User Guide DECLARATION OF CONFORMITY We, NOKIA CORPORATION declare under our sole responsibility that the product RM-11is in conformity with the provisions of the following Council Directive:1999/5/EC. A copy of the Declaration of Conformity can be found at http://www. nokia. com/phones/declaration_of_conformity/. Copyright ©2005 Nokia. Nokia, Nokia 3205, Pop-Port, Nokia Connecting People, and the Nokia Original Enhancements logos are trademarks or registered trademarks of Nokia Corporation. Other company and product names mentioned herein may be trademarks or trade names of their respective owners. [. . . ] Scroll to one of the four memory locations and press Options > Edit > OK > Dialing sequence and press Select. Scroll to one of the following sequence types and press Select: Access no. + phone no. + card no. --Dial 1-800 access number, phone number, then card number (+ PIN if required) Access no. + card no. + phone no. --Dial 1-800 access number, card number (+ PIN if required), then phone number Prefix+ phone no. + card no. --Dial the prefix (numbers that must precede the phone number) and phone number you want to dial, then card number (+ PIN if required) 5. Enter the required information (access number or prefix and card number) and press OK to confirm your entries. Note: Contact your calling card company for more information. Make calls After you have saved your calling card information in your phone, you can make a call using your calling card. At the start screen, select Menu > Settings > Call settings > Calling card and press Select. Scroll to the calling card of your choice, select Options > Select > OK. Press the End key to return to the start screen; then enter the phone number, including any prefix (such as 0 or 1), that your calling card may require when you make a calling card call. Press and hold the Send key for a few seconds until Card call is displayed. When you hear the tone or system message, press OK. 57 Settings (Menu 4) Receive data or fax calls Data or fax calls is a network service. If your wireless service provider supports this feature, then you can set up the phone to send or receive data or fax calls when a terminal, such as a PDA or PC, is connected. For better performance during data calls, place the phone on a stationary surface with the keypad facing downward. At the start screen, select Menu > Settings > Call settings > Data/fax calls > Incoming data/fax call > Normal, Data calls only, or Fax calls only and press Select: Normal--The phone receives incoming calls as usual. When you are finished receiving the fax or data call, repeat Steps 1 and 2 and select Normal. Data transfer You can view the transmission speed when sending or receiving data or fax calls. At the start screen, select Menu > Settings > Call settings > Data/fax calls > Data rate display > Graphic or Off and press Select. Phone settings Set the display language 1. At the start screen, select Menu > Settings > Phone settings > Phone language and press Select. The language setting affects the time and date formats of the clock, alarm clock, and calendar. 58 Settings (Menu 4) Use automatic Keyguard You can set the keypad of your phone to lock automatically after a preset time delay (from 10 seconds to 60 minutes). At the start screen, select Menu > Settings > Phone settings > Automatic keyguard > On or Off and press Select. Note: When keyguard is on, it may be possible to dial the emergency number programmed into your phone. The number is displayed only after you have keyed in its last digit. Touch tones Touch tones, or DTMF tones, are the tones that sound when you press the keys on your phone's keypad. You can use touch tones for many automated dial-up services such as banking and airlines, or for entering your voice mailbox number and password. You can send them manually from your phone's keypad, or send them automatically by saving them in your phone. Set type 1. At the start screen, select Menu > Settings > Phone settings > Touch tones > Manual touch tones and press Select. [. . . ] If certain features are in use, you may first need to turn those features off before you can make an emergency call. When making an emergency call, give all the necessary information as accurately as possible. Your wireless phone may be the only means of communication at the scene of an accident. Do not end the call until given permission to do so. Certification Information (SAR) THIS DEVICE MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE TO RADIO WAVES Your mobile device is a radio transmitter and receiver. [. . . ]