User manual NOKIA BLUETOOTH STEREO HEADSET BH-216

[. . . ] Bluetooth is a registered trademark of Bluetooth SIG, Inc. ENGLISH laws and regulations from the US and other countries. Diversion contrary to law is prohibited. Introduction With the Nokia Bluetooth Headset BH-216, you can make and answer calls hands-free with your compatible mobile device. Also, read the user guide for the device that you connect to the headset. of sight, but they should be within 10 metres (33 feet) of each other. [. . . ] Within about 3 minutes, activate Bluetooth connectivity on the Switch on or off mobile device, and set it to search To switch on, press and hold the power for Bluetooth devices. Select the headset from the list of beeps, and the green indicator light is found devices. If necessary, enter the passcode connect to the last connected device. 0000 to pair and connect the To switch off, press and hold the headset to your device. The devices, you may need to make the ENGLISH connection separately after pairing. When the headset is connected to your device and is ready for use, the green indicator light flashes slowly. You can pair the headset with up to eight devices, but you can connect it to only one device at a time. To manually connect the headset to the last used device, switch the headset off and on, or press and hold the answer/end key for about 2 seconds. You may be able to set your device so that the headset connects to it automatically. To activate this feature in a Nokia device, change the paired device settings in the Bluetooth menu. Basic use Change the earpad The headset may be provided with different sized earpads. Select the earpad that fits the best and is the most comfortable for your ear. To change the earpad, pull the current earpad from the earpiece, and push the new earpad into place, with the narrower end first (12). Place the headset on the ear Gently push the earpiece against your ear. You can rotate the earpad to keep the headset securely in the ear (13). For example, if you use the headset on the right ear, you may need to rotate the earpad to the right for the best fit. If you wear an earring, ensure that it is ENGLISH not accidentally attached to the earpad. Slide the earloop behind your ear (9), and point the headset towards your mouth (10). When the microphone is muted, the Calls To make a call, use your mobile device green indicator light flashes twice in the normal way when the headset is about every 5 seconds. To redial the number you last called (if compatible device, press and hold the your device supports this feature with answer/end key for about 2 seconds, or switch off the headset. To switch the headset), when no call is in the call back to the headset, press and progress, press the answer/end key hold the answer/end key for about 2 twice. To activate voice dialling (if your Turn lights on or off device supports this feature with the headset), when no call is in progress, By default, the indicator lights are on press and hold the answer/end key for in all situations. To turn the lights off ENGLISH in some situations (for example, during a call or when the headset is connected to a mobile device) or back on, press and hold the power key and the answer/end key for about 2 seconds when the headset is connected to a device. To reset the headset if it stops functioning, even though it is charged, connect the headset to a charger while you press and hold the power key. [. . . ] Important: Battery talk and standby times are estimates only and depend on network conditions, features used, battery age and condition, temperatures to which battery is exposed, and many other factors. The amount of time a device is used for calls will affect its standby time. Likewise, the amount of time that the device is turned on and in the standby mode will affect its talk time. ENGLISH Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The following suggestions will help you protect your warranty coverage. [. . . ]