User manual PANASONIC CUE18RBEA
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PANASONIC CUE18RBEA. We hope that this PANASONIC CUE18RBEA user guide will be useful to you.
You may also download the following manuals related to this product:
PANASONIC CUE18RBEA (4080 ko)
PANASONIC CUE18RBEA (4129 ko)
PANASONIC CUE18RBEA (4129 ko)
PANASONIC CUE18RBEA (4129 ko)
PANASONIC CUE18RBEA (4129 ko)
PANASONIC CUE18RBEA (1793 ko)
PANASONIC CUE18RBEA (4129 ko)
Manual abstract: user guide PANASONIC CUE18RBEA
Detailed instructions for use are in the User's Guide.
[. . . ] Operating the unit within the recommended temperature may save energy. To dim or restore the unit’s indicator brightness, press and hold for 5 seconds. Use remote control within 8 m from the remote control receiver of the indoor unit. [. . . ] Do not install the unit in oily and smoky areas to prevent damage to the unit. Do not step onto an unstable bench when cleaning the unit to avoid injury. Do not open window or door for long time during COOL/DRY mode operation. Prevent water leakage by ensuring drainage pipe is: - Connected properly, - Kept clear of gutters and containers, or - Not immersed in water After a long period of use or use with any combustible equipment, aerate the room regularly. After a long period of use, make sure the installation rack does not deteriorate to prevent the unit from falling down. To prevent malfunction or damage of the remote control: • Remove the batteries if the unit is not going to be used for a long period of time. New batteries of the same type must be inserted following the polarity stated. CAUTION Indoor unit and outdoor unit
Do not wash the indoor unit with water, benzine, thinner or scouring powder to avoid damage or corrosion at the unit. Safety precautions
English
5
How to use
MODE
Single Multi
Single split system Multi split system
To select operation mode
Remote control receiver
AUTO - For your convenience • During operation mode selection the POWER indicator blinks. Unit selects operation mode every 10 minutes according to setting temperature and room temperature. COOL - To enjoy cool air • To reduce power consumption during COOL mode, use curtains to screen off sunlight and outdoor heat. DRY - To dehumidify the environment • Unit operates at low fan speed to give a gentle cooling operation. CL OS E
AIR SWI
TIM ER ER
POW
EN
NG
OFF
OP
/ON
CL
OS
E
OP
EN
Control Panel
POWER (Green) TIMER (Orange) POWERFUL (Orange) QUIET (Orange)
Remote control display
AUTO
AIR SWING (Orange)
POWERFUL/ QUIET
To switch between powerful & quiet
QUIET NORMAL
AUTO HEAT COOL DRY
FAN SPEED AIR SWING
POWERFUL
OFF/ON
POWERFUL: To reach temperature quickly
POWERFUL
Single Multi
MODE
• This operation stops automatically after 20 minutes. Press the button again or turn OFF the unit to stop this operation. TEMP AIR SWING
POWERFUL/ QUIET FAN SPEED
TIMER ON 1 2
SET 3
Press and hold for approximately 10 seconds to show temperature setting in °C or °F. SET CHECK CLOCK
RESET
Can be activated in all modes and can be cancelled by pressing the respective button again. Press and hold the button until you hear 1 beep, then release to use in forced COOL mode. Press and hold the button until you hear 2 beeps, then release to use in normal COOL mode. [. . . ] Symptom Check
Operation in HEAT/COOL mode is not working • Set the temperature correctly. The unit does not receive the signal from the • Make sure the receiver is not obstructed. Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE PANASONIC CUE18RBEA
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PANASONIC CUE18RBEA will begin.