User manual PANASONIC PT-AE3000
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PANASONIC PT-AE3000. We hope that this PANASONIC PT-AE3000 user guide will be useful to you.
Manual abstract: user guide PANASONIC PT-AE3000
Detailed instructions for use are in the User's Guide.
[. . . ] PT-AE3000U
Before operating this product, please read the instructions carefully and save this manual for future use. TQBJ0277-1
ENGLISH
Important Safety Notice
Dear Panasonic Customer:
The following information should be read and understood as it provides details, which will enable you to operate the projector in a manner which is both safe to you and your environment, and conforms to legal requirements regarding the use of projectors. Before connecting, operating or adjusting this projector, please read these instructions completely and save this booklet with the projector for future reference. We hope it will help you to get the most out of your new product, and that you will be pleased with your Panasonic LCD projector. [. . . ] CURSOR RETURN SELECT ENTER DEFAULT COLOR TINT BRIGHTNESS
PROFILE NORMAL CURSOR LOG PROFILE SAVE PROFILE DELETE PROFILE NAME CHANGE
Adjusted color
Create a new profile
Adjusting the selected color
Select a color and adjust COLOR, TINT and BRIGHTNESS. When the LOG is fully stored, the target cursor will not be displayed. ÂPROCESSINGâ is displayed for a few seconds and the result is stored in LOG. Managing stored logs
You can edit or delete the stored logs of the selected PICTURE MODE. Move the cursor with F G I H to the required place to select a color and press ENTER. The color at the center of the target cursor is sampled and the sample box is displayed on the left of the cursor. You may fail to adjust when the very edge point of the projection area is selected as sample. 26 - ENGLISH
Remote control operation
Saving a log setting as a profile
Return to the COLOR MANAGEMENT menu and save the stored log as a profile. Deleting the saved profiles
You can delete the profiles from PROFILE DELETE menu. Changing the profile names
You can change the name of the profiles from the PROFILE NAME CHANGE menu. Use F G I H to specify the location of the required character to enter and press the ENTER button. Use F G I H to specify the location of the required character to enter and press the ENTER button. Select OK and press the ENTER button to set the entered text as a name. Move cursor to ALL DELETE and press the ENTER button to delete all the entered text line. Press the DEFAULT button to delete the last entered character or indicated with cursor in the text box. To insert a character in the entered text line, move the cursor to the text box to select the required place and press G then perform step 3. Select OK and press the ENTER button to set the entered text as a name. Press the ENTER button without entering any text to keep the default name. NOTE:
⢠LOG and PROFILE SAVE are not displayed before you apply COLOR MANAGEMENT. ¢ When the LOG is fully stored, the CURSOR will not be displayed. ¢ If you load a profile with a different attribute mode of the profile, the CURSOR and PROFILE SAVE menus will not be displayed. ⢠The approximate colors will be adjusted at the same time. [. . . ] When a command which does not require parameters to be sent, the colon (:) is not required. If an incorrect command is sent from the personal computer, the ER401 command will be sent from the projector to the personal computer. eNGLISH - 51
Appendix
Technical Information Communication settings
Signal level Sync. Method Baud rate Parity RS-232C Asynchronous 9 600 bps None Character length Stop bit X parameter S parameter 8 bits 1 bit None None
Control commands
Command PON POF Control contents
POWER ON POWER OFF
Remarks
In standby mode, all commands other than the PON command are ignored. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE PANASONIC PT-AE3000
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PANASONIC PT-AE3000 will begin.