User manual PHILIPS GC 4440

[. . . ] The soleplate of the iron can become extremely hot and may cause burns if touched. When you have finished ironing, when you clean the appliance, when you fill or empty the water tank and also when you leave the iron even for a short while: set the steam control to position 0, put the iron on its heel and remove the mains plug from the wall socket. Always place and use the iron on a stable, level and horizontal surface. Do not put perfume, vinegar, starch, descaling agents, ironing aids or other chemicals in the water tank. [. . . ] Features spray function You can use the spray function at any temperature to moisten the article to be ironed. Steam boost function A steam boost from the special Steam Tip soleplate helps remove stubborn creases. The steam boost enhances the distribution of steam into every part of your garment. The steam boost function can only be used at temperature settings between 3 and MAX. Vertical steam boost 1 You can also use the steam boost function when you hold the iron in vertical position. 12) This is useful for removing creases from hanging clothes, curtains etc. Drip stop This iron is equipped with a drip-stop function: the iron automatically stops producing steam when the temperature is too low, to prevent water from dripping out of the soleplate. The automatic shut-off function automatically switches off the iron if it has not been moved for a while. , The red AUTO/OFF indication of the temperature light flashes to indicate that the iron has been switched off by the automatic shutoff function. To let the iron heat up again: 1 Pick up the iron or move it slightly. , If the temperature of the soleplate has dropped below the set ironing temperature, the amber temperature light goes on. 2 If the amber temperature light goes on after you have moved the iron, wait for it to go out before you start ironing. Note: If the amber temperature light does not go on after you move the iron, the soleplate still has the right temperature and the iron is ready for use. delicate fabric protector (specific types only) The delicate fabric protector protects delicate fabrics from heat damage and shiny patches. With the delicate fabric protector you can iron delicate fabrics (silk, wool and nylon) at temperature settings 3 to MAX in combination with all steam functions available on the iron. the delicate fabric protector reduces the soleplate temperature instantly , thus allowing you to iron delicate fabrics safely. If you do not know what kind or kinds of fabric an article is made of, determine the right ironing temperature by ironing a part that is not visible when you wear or use the article. Cleaning and maintenance Cleaning 1 Wipe flakes and any other deposits off the soleplate with a damp cloth and a non-abrasive (liquid) cleaning agent. Never use a scouring pad, vinegar or other chemicals to clean the soleplate. Double-active Calc system The Double-Active Calc System consists of an Anti-Calc tablet inside the water tank combined with the Calc-Clean function. Using the Calc-Clean function Use the Calc-Clean function once every two weeks. When flakes come out of the soleplate during ironing), use the Calc-Clean function more frequently. [. . . ] You have used the steam boost function too often within a very short period. You have not closed Press the cap until you hear a the cap of the filling click. Problem Possible cause You have used the steam boost function at a temperature setting below 3. Water drips from the soleplate after the iron has cooled down or has been stored. [. . . ]