User manual PHILIPS HD7850

[. . . ] To fully benefit from the support that Philips offers, register your product at www. This unique system combines the easy-to-use Philips SENSEO® coffee machine with the specially developed Douwe Egberts SENSEO® coffee pods, giving you a full, smooth coffee with a delicious foam layer. The SENSEO® Latte Select coffee machine offers you delicious coffee specialties made with fresh frothed milk. Choose from cappuccino, latte macchiato, café latte and regular SENSEO® black coffee - all at the touch of a button. [. . . ] If you switch the machine back on after having interrupted the brewing process, the machine does not complete the interrupted brewing cycle. Caution: Do not remove the water reservoir during a brewing cycle, as this causes the machine to draw in air. Remove the coffee pod(s) after use by lifting the pod holder out of the machine and emptying it. Be careful when you do this, for there may still be some water/coffee on the coffee pod(s). 8 Flush the milk container unit after you have brewed a cappuccino, latte macchiato or café latte (see section `Flushing after every use' in chapter `Cleaning'). Put the milk container lid on the milk container and place the milk container unit back into the machine. Note: Make sure the parts of the milk container lid are dry before you reassemble the lid. cleaning the machine 1 Always unplug the machine before you clean it. Remove the coffee spout cover and take the coffee spout out of the machine. 5 Clean the coffee spout cover, the coffee spout, the coffee collector and the drip tray in hot water, if necessary with some washing-up liquid, or in the dishwasher. To clean the cup tray, always remove it from the machine, as it might prove sharp when handled incorrectly. Clean the pod holders in hot water, if necessary with some washingup liquid, or in the dishwasher. If this is the case, rinse the pod holder under a running tap to unclog the sieve. Note: If you use a washing-up brush, be careful not to damage the valve in the bottom of the water reservoir. 9 Do not use an object with sharp edges to clean the water inlet on the machine. 10 Rinse the parts with fresh water after cleaning and put them back into the machine. Be careful when you do this; make sure that the rubber sealing ring does not get stuck under the edge of the water distribution disc. Flushing the coffee machine If you have not used the coffee machine for three days, you have to flush it with fresh water before you use it again. Flush the machine in the following way: 1 Fill the water reservoir with cold water up to the maX indication and put it back onto the machine. Put the 1-cup pod holder q or the 2-cup pod holder qq in the machine without pod(s). Note: Make sure the lid lever is properly locked by pushing it down until it snaps home with a click. It is not possible to flush the machine when the lid is not properly closed. [. . . ] Make sure there is enough water in the water reservoir to brew a cup of coffee. When you brew cappuccino, latte macchiato or café latte, you cannot operate the volume select button. Make sure that: you have used the correct number of pods and have pressed the right button. Use 1 pod in combination with the 1-cup pod holder qq and the 1- cup button qq. [. . . ]