Detailed instructions for use are in the User's Guide.
[. . . ] Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-
umschl_v. fm
25. 09. 0
Gigaset S 88
Be inspired
User Manual and Safety Precautions
Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-
umschl_v. fm
25. 09. 0
General
Congratulations
Congratulations on your purchase of the Siemens Gigaset telephone system!This phone´s 2. 4 GHz frequency and high-speed digital voice encoding provide reception and voice clarity that is superior to other cordless phones. And, its digital spread spectrum technology will provide you with secure, private conversations.
II
Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-
umschl_v. fm
25. 09. 0
General
Quick Reference
Handset
Turning on/off the handset (see page 5)
hold down
a
Turning keypad protection on/ hold down ª off (see page 6) Turning tones on/off (see page 40) Making an external call (see page 8) Redialing a number (see page 13) Saving a called number in the directory (see page 19) Dialing from the directory (see page 20) Setting the handset volume (see page 40)
hold down «
o
z if necessary D select entry c z MENU D Send to Dir D
o[Name] if necessary
c
MENU D Sound Settings DF or G Save
[ Handset Volume [
D c or D
[
c
Making an Internal call to a speF and cific handset Making an Internal call to a all handsets (see page 8) Transferring a call to another handset Making a consultation call Setting the date and time (see page 7) Setting the alarm clock (see page 15)
D to select internal user c
F and D Intercom Call
F and D to select internal user [ a
MENU D Appoint. /Clock MENU D Appoint. /Clock
c
F and D to select internal user [ ; end: End
Set date and time F G D Save
[D
Date/Time
[ [
Enter settings F G D Save
[D
Alarm Clock
III
Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-
umschl_v. fm
25. 09. 0
General
Handset Diagram
Status LED (light)
Lights up during a call; Flashes for: Incoming calls New messages Alarm calls, appointments, anniversaries flashes when low
= empty e U full V
Charging status
1/3 2/3
Signal strength
(strong, medium, weak)
Soft keys
Navi key Talk key
Accept call Dial number
Annabella 07 . 19. 01 13:13
Ñ
e
The soft keys give you access to the function shown in the display.
{
MENU
End call and On/ Off key
end call cancel function back one menu level (press briefly) return to idle state (hold down) on/off in idle status (hold down)
INT
Speakerphone key
Switch from handset to speakerphone.
1 4 GHI 7 PQRS
2ABC 5JKL 8TUV 0
3 DEF 6 MNO 9 WXYZ
Open directory Key 1
(Programmable) Hold down to select telco voice mailbox
Pound key
Hold down to turn on and off the keypad protection
Star key (*)
Hold down to turn on and off the ringer
Memory key
Accesses speed dial numbers
Microphone
Using the Navi Key and Soft Keys
Soft keys With the right soft keys you can carry out functions that can also be partly controlled with the navi key. The side of the navi key which you must press is indicated in the operating instructions by arrows: Navi key
INT
F/ G (left/right) E/ D (top/bottom)
IV
Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-
umschl_v. fm
25. 09. 0
General
Functions of the Navi Key
The navi key has different functions in specific operating situations. [. . . ] However, you can change these names, for example, to ANNE or OFFICE (10 characters maximum).
F Press left on the navi key (INT) and the list of handsets
is displayed. Enter the new name.
E D Scroll to the desired handset
Edit
o
Save Press Save.
Changing a Handset's Intercom Number
You can change the number of a handset.
F Press left on the navi key (INT) and the list of handsets
is displayed. Intercom Intercom Call INT Eric 4 <
MENU
Four handsets are registered already. "Intercom Call" is only displayed if more than one user is registered.
Î
MENU
Press Menu. handsets are displayed.
Assign Number åååååååååååååååååååååååååååååååå [ Scroll to Assign Number and press OK. All registered
E D Select the desired handset
If necessary:
o Enter an available intercom number.
E D o Scroll to a different intercom and change it first. [ Press OK to save changes.
If the selected intercom telephone number has already been assigned to a different handset, you will hear an error tone (descending tone sequence).
32
Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619
mobilt_an. fm
25. 09. 03
Handset Operation Press keys:
Making Internal Calls
Internal calls are calls to other registered handsets; they do not require an outside line. For example:
F Press INT on the navi key (left side) and the list of handsets is displayed Your own handset is identified by "<" .
D E Scroll to the handset you wish to call.
c
or
Press Talk.
e. g. Y Simply enter the number of the handset you wish to call and you are automatically connected.
a
End the call: Press End.
Call Forwarding
You can forward an external call to another handset.
F Press INT on the navi key (left side) and the list of handsets is displayed Your own handset is identified by "<"
E D Scroll to the handset you wish to call.
c a
Press Talk. When the other handset answers, announce the external call then: Press End. Instead of announcing the call, you can immediately press the End key. If the internal user does not answer or if the line is busy the call goes automatically back to you.
33
Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619
mobilt_an. fm
25. 09. 03
Handset Operation Press keys:
Consultation Call
If you are on an external call you can call another internal handset and conduct a consultation call without hanging up on the external caller. You are automatically reconnected to the external caller when you end the consultation call.
F Press INT on the navi key (left side) and the list of handE D c Scroll to the handset you wish to call and press Talk.
Ending the Consultation Call:
End
sets is displayed Your own handset is identified by <. The external caller is put on hold.
Press the End softkey - You are now reconnected to the external call.
or
a
Press the End key and the call is transferred to the consulted handset.
Accepting or Rejecting a Waiting Call
If you receive an external call during an internal call you will hear the call waiting tone if you subscribe to this feature from your local telephone company.
Accept
Press Accept - The internal call is ended; you are connected to the external call. Press Reject You stay connected to the internal user.
or
Reject
Turning the Ringer Off
You may turn off the ringer on any handset.
« Hold down the star key until the handset does not ring
any more. To turn the ringer back on press the star key.
34
Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619
mobilt_an. fm
25. 09. 03
Handset Operation Press keys:
Paging all Handsets from the Base (Locating Handsets)
Press the Page/Registration buttons on the bottom side of the base station very briefly. All handsets ring at the same time.
To End Paging
Press the Page/Registration button again.
or
c
Press the Talk key on a handset.
35
Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619
mobilt_an. fm
25. 09. 03
Handset Operation Press keys:
Room Monitor
You can use any Gigaset S88 handset to monitor a room. If a certain noise level is reached (for example a baby crying or a door opening) the handset will automatically dial the number you stored. When you answer the call you will hear the noises in the room being monitored. The distance from the handset to the object or space being monitored should be at least . The number you store can be:
G G
An internal number - An additional registered handset required. An external number - A cell phone number or another fixed network number where you can be contacted (i. e. [. . . ] This warranty does not apply to defects outside of our control, including but not limited to acts of God, fire, flood, damage while in transit to service facility. We do not warranty that the product will be compatible with any telephone equipment or systems or party lines. This warranty shall be void if the product is damaged as a result of defacement, misuse, abuse, neglect, accidents, destruction, or alteration of the serial number, improper electrical voltages or currents, repair, alteration or maintenance by any person or party other than our authorized service facility or any violation of instructions furnished by us. This warranty is also void if this product is removed from the country in which the original purchaser purchased it, if it is used in a country, which it not registered for use, or if it is used in a country for which it was not designed. [. . . ]