User manual SIEMENS TK 69...

[. . . ] The Directive paves the way for effective EU wide withdrawal and utilisation of waste applicances. Before using your appliance for the first time general Fill the respective containers with pure, non carbonated water only and preferably a mixture of espresso or coffee beans. Do not use coffee beans which have been glazed, caramelised or treated with other additives containing sugar. [. . . ] Warning Adjust the degree of grinding only while the grinding unit is running!Q While the grinding unit is running, turn the knob to select the degree of grinding: the smaller the dots the finer the ground coffee. I The new setting will not become apparent until The second or third cup is brewed. Q Open the right cover of the appliance 19 and the cover on the ground coffee duct 16. Q Add one to two level scoops of medium fine ground coffee to the ground coffee duct 16. Q Close the cover on the ground coffee duct 16 and the right cover of the appliance 19. If coffee is not brewed within 90 seconds, the brewing chamber is emptied automatically in order to prevent overfilling. : Attach milk container 28 with connection hose tightly to the nozzle body. Q End the process by repressing the = 2b button if the desired amount has been made or before the milk receptacle has been fully emptied. Note: To clean the froth nozzle 13, the hose 13f and the connection hose 28b carry out the process cited above using clear water instead of milk - see chapter Cleaning/ Cleaning the froth nozzle". Dried residue is difficult to remove and impairs formation of the milk froth. Milk drinks such as cocoa for example, can be prepared using the warming up milk setting B. ) sunken macchiato plate 29 the possibility also exists to use tall glasses (up to approx. Q Place glass under the outlet nozzle and draw milk froth according to the instructions. Q Then place the glass under the coffee outlet 12 and draw the desired amount of coffee. The appliance has been set at the factory so that coffee can be brewed without any additional programming. These basic settings can be changed with the function buttons under display 3. The appliance must be switched on before the basic settings can be changed. [. . . ] Degree of grinding is set too fine and the coffee strength rotary knob selected is VERY MILD. Remedial action Wait until the appliance has warmed up to room temperature. Switch off the appliance for at least 10 seconds with the mains switch 1 1. [. . . ]