User manual SONY LBT-V102
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SONY LBT-V102. We hope that this SONY LBT-V102 user guide will be useful to you.
Manual abstract: user guide SONY LBT-V102
Detailed instructions for use are in the User's Guide.
[. . . ] The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red. Do not connect either wire to the earth terminal in the plug which is marked by the letter E or by the safety earth symbol Y or coloured green or greenand-yellow. WARNING To prevent shock hazard, do not insert the plug cut off from the mains lead into a socket outlet. Note The AC power cord has been fixed on the rear panel with the plug band temporarily for shipment. [. . . ] n 1/ALL DISCS REPEAT
/ Press REPEAT repeatedly during
playback until "REPEAT" appears in the display.
Repeat Play starts. The following table describes the various repeat modes.
To check the total playing time and the number of tracks on a CD
Press DISPLAY/DEMO in stop mode. If you press DISPLAY/DEMO again, the clock display appears for a few seconds then the display returns to the previous indication.
* You can't repeat a single track during Shuffle Play and Programme Play.
To cancel Repeat Play
Press REPEAT repeatedly until "REPEAT" or "REPEAT 1" disappears from the display.
18
Playing CD tracks in random order
-- Shuffle Play
You can play all the tracks on one CD or all the CDs in random order.
To cancel Shuffle Play
Press PLAY MODE repeatedly until "SHUFFLE" or "PROGRAM" disappears from the display. The tracks continue playing in their original order.
To select a desired CD
Press one of the DIRECT PLAY buttons during 1 Disc Shuffle Play. Tips
· You can start Shuffle Play during Normal Play by pressing PLAY MODE repeatedly until "SHUFFLE" appears in the display. · To skip a track, turn the jog dial clockwise (or press AMS + on the remote).
1
DIRECT PLAY
43
Jog dial
2
1 2 3
Press FUNCTION repeatedly until "CD" appears in the display. Press PLAY MODE repeatedly until "SHUFFLE" appears in the display. Press 1/ALL DISCS to choose "1 DISC" or "ALL DISCS. "
"All DISCS" shuffles the tracks on all the CDs in the player. "1 DISC" shuffles the tracks on the CD in the playing position.
4
Press ·.
"J" appears and all the tracks play in random order.
19
Programming CD tracks
Programme Play
You can create a programme of up to 32 tracks from all the CDs in the order you want them to be played.
2 3 4 5
Press FUNCTION repeatedly until "CD" appears in the display. Press PLAY MODE repeatedly until "PROGRAM" appears in the display. Turn the jog dial until the desired track appears in the display.
LBT-V102
2
Disc number Track number
DOLBY NR OFF
DISC PROGRAM
Total playing time
LBT-XB5/XB6
Disc number
Track number
DOLBY NR OFF
DISC PROGRAM
Total playing time
8 1 4 5 3, 6
p
6
p CHECK CLEAR
Press PLAY MODE once.
The track is programmed. To adjust the flash length
Turn the jog dial while holding FLASH (or press MUSIC MENU B/b while holding FLASH on the remote) to select different flash lengths.
To use LOOP and FLASH together
Press and hold both LOOP and FLASH at the same time. Adjust the loop and flash lengths during operation.
25
Waving the equalizer
-- Wave
With the Wave function, you can fluctuate the graphic equalizer automatically while listening to a source. This effect can be used with any source, but it cannot be recorded.
WAVE
Jog dial
/ Press and hold WAVE while
listening to a source at the point you want to start the Wave function, and release to resume normal playback. To adjust the wave length
Turn the jog dial while holding WAVE to select different wave lengths.
26
Sound Adjustment
Adjusting the sound
You can reinforce the bass, create a more powerful sound, and listen with headphones.
GROOVE DBFB SUPER WOOFER
To select the super woofer mode (LBT-XB6 only)
Press SUPER W MODE while the super woofer is on. Each time you press this button, the super woofer mode display changes as follows: MOVIE ~ MUSIC
For a powerful sound (GROOVE)
Press GROOVE. The volume switches to power mode, the equalizer curve changes, the bass level (DBFB or SUPER WOOFER) changes to "HIGH, " and the indicator on the GROOVE button lights up. Notes
· The music sound will be distorted when you use the DBFB system with the graphic equalizer if the bass is too strong. Adjust the bass slowly while listening to the music so you can monitor the effect of the adjustment. · Cancelling GROOVE cancels the equalizer curve and bass level. Adjust the equalisation to obtain the effect you desire.
To listen through the headphones
PHONES SUPER W MODE
Connect the headphones to the PHONES jack. No sound will come from the speakers.
To reinforce the bass (DBFB) (LBT-V102/XB5 only)
Press DBFB. * Each time you press this button, the DBFB level display changes as follows: n DBFB n DBFB n display off
"DBFB "DBFB
" reinforces the bass more than ".
* DBFB = Dynamic Bass Feedback
To reinforce the bass from the super woofer (SUPER WOOFER) (LBT-XB6 only)
Press SUPER WOOFER. [. . . ] First, check that the mains lead is connected firmly and the speakers are connected correctly and firmly. Should any problem persist, consult your nearest Sony dealer.
DAILY 1, DAILY 2, and REC do not appear when you press t/CLOCK SET. ·The remote is not pointing in the direction of the system's sensor. ·Move the microphone away form the speakers or change the direction of the microphone. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SONY LBT-V102
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SONY LBT-V102 will begin.