User manual SONY VPL-ES4
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SONY VPL-ES4. We hope that this SONY VPL-ES4 user guide will be useful to you.
You may also download the following manuals related to this product:
SONY VPL-ES4 (2026 ko)
SONY VPL-ES4 (2325 ko)
SONY VPL-ES4 (2302 ko)
SONY VPL-ES4 (1433 ko)
SONY VPL-ES4 (1408 ko)
SONY VPL-ES4 annexe 1 (496 ko)
SONY VPL-ES4 annexe 2 (1460 ko)
SONY VPL-ES4 annexe 1 (1451 ko)
SONY VPL-ES4 annexe 1 (1429 ko)
SONY VPL-ES4 annexe 2 (1454 ko)
SONY VPL-ES4 annexe 2 (2325 ko)
SONY VPL-ES4 annexe 2 (2325 ko)
SONY VPL-ES4 annexe 3 (2325 ko)
SONY VPL-ES4 annexe 2 (2325 ko)
SONY VPL-ES4 annexe 3 (2325 ko)
SONY VPL-ES4 annexe 3 (179 ko)
SONY VPL-ES4 annexe 3 (179 ko)
SONY VPL-ES4 annexe 4 (179 ko)
SONY VPL-ES4 annexe 3 (179 ko)
SONY VPL-ES4 annexe 1 (179 ko)
SONY VPL-ES4 annexe 4 (179 ko)
SONY VPL-ES4 annexe 1 (1445 ko)
SONY VPL-ES4 annexe 1 (1436 ko)
SONY VPL-ES4 annexe 1 (179 ko)
SONY VPL-ES4 annexe 3 (1262 ko)
SONY VPL-ES4 annexe 4 (2325 ko)
SONY VPL-ES4 annexe 1 (4226 ko)
SONY VPL-ES4 annexe 2 (179 ko)
Manual abstract: user guide SONY VPL-ES4
Detailed instructions for use are in the User's Guide.
[. . . ] To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. When installing the unit, incorporate a readily accessible disconnect device in the fixed wiring, or connect the power cord to socket-outlet which must be provided near the unit and easily accessible. If a fault should occur during operation of the unit, operate the disconnect device to switch the power supply off, or disconnect the power cord. Dispose of used batteries according to the manufacturer's instructions. [. . . ] Press the v, V, b or B key to select a language, then press the ENTER key. The menu disappears automatically if a key is not pressed for one minute. When you turn the power of the projector on, you are required to input the previously set password. If you do not input the correct password, you will not be able to project the picture. You will not be able to use the projector if you forget your password and the password administrator is not available. Be please aware that using the security lock can prevent valid usage in such cases. When you set the security lock being active, the password will be necessary only when the power is turned on after plugging the power cord. To use the security lock When the following message is displayed, the setting for security lock is completed. Press the MENU key and then, on the INSTALL SETTING menu, turn on the "Security Lock" setting. Use the MENU, v/V/b/B, and ENTER keys to enter the four-digit password. (The default initial password setting is "ENTER , ENTER , ENTER , ENTER. Therefore, when you use this function for the first time, please input "ENTER" four times. " is displayed on the screen, perform this procedure again from step 1. The screen used for entering the password is displayed when the power is turned on the next time. Security certification When the password screen is displayed, enter the password that was set. If you fail to enter the correct password after three tries, the projector cannot be used. (Enter the password on this screen even if you want to keep the current password. Press the MENU key, then turn off the "Security Lock" setting on the INSTALL SETTING menu. If you call the customer service center because you have forgotten the password, you will need to be able to verify the projector's serial number and your identity. ) Once your identity has been confirmed, we will provide you with the password. By pressing the + key repeatedly, the image size (ratio of enlargement: max. To return the image to its original size Press the D ZOOM key. [. . . ] Flashes) c Wait for 60 seconds to cool the lamp and then turn on the power again. Unplug the AC power cord from the wall outlet after the ON/ STANDBY indicator goes out, plug the power cord to the wall outlet, and then turn the projector on again. Use the list below to check the meaning of the messages displayed on the screen. When this message appears even after replacing the lamp, the task has not been completed. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SONY VPL-ES4
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SONY VPL-ES4 will begin.